Dry Mortar Plant

ZKJ38/100 Extruded grouting pump machine

ZKJ38/100 Extruded grouting pump machine

Product Description

Component

ZKJ-38/100 extrusion grouting pump improves the design of new products on the basis of absorbing the advantages of similar machines at home and abroad. It is novel and simple in structure, convenient in use, high in pressure, high in efficiency and wide use. The extrusion grouting pump can not only pump high concentration and high viscosity materials such as mortar, cement slurry and pulp, but also can be used for spraying. The pipe is connected by the suction pipe at the lower end of the tube and the pipe is connected by the pressure meter assembly. When the extruding wheel is rotated, the extruding roller is transported along the extrusion tube for planet rotation and press on the extruding tube to roll automatically, so that the slurry in the extrusion pipe is squeezed, discharged along the pipe and pressed through the extrusion wheel. After that, the vacuum is formed in the extrusion tube, the slurry in the storage barrel is under negative pressure, and the suction tube is inhaled into the extrusion tube, so that the suction and discharge of the slurry are realized.

Applicable Materials

Technical Specification

Pressure

3 Mpa

Power

2.2/2.8 kw

Shell dimension

1125*540*850mm

Shipping measure

0.5m³

Weight

260kg

 

Parameter

Available paint:

Cement mortar, dry mortar, putty powder, latex paint, waterproof coating, plaster, etc.

Sprayable wall:

Cement wall, brick concrete wall, hollow wall, light brick wall, non-burning brick wall.

Construction site:

Exterior wall spraying, interior wall spraying, waterproof material spraying, slope spraying, real stone spraying.

Inquiry

Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.

Whatsapp E-mail Inquiry Tel