Product Introduction
Mini-type dry mortar mixing production line, which covers a small area, is cheap and easy to operate, is very suitable for small factories.
This solution includes 6 procedures:
Artificial feeding →lifting material → mixing →two lifting of materials → finished product storage→weighing and packaging;
1). Artificial feeding: manual feeding of raw materials and additives into the mouth;
2). To enhance the material: and then through a hoist to lift the material to the mixer;
3). Mixing: mixing machine for the full mixing of materials, about 5-10 minutes;
4). The two lifting material: after the completion of the material, through the two lift, transport to the finished goods warehouse;
5). Finished warehouse: finished warehouse after receiving material, storage;
6). Weighing and packaging: through the outlet of the finished warehouse packaging machine for automatic weighing and packaging.
Applicable Materials
Also used for Foundry sand,Crack Resistant Mortar,Plastering Mortar,Bonded Mortar,Decorative Mortar,Masonry Mortar,Gypsum Mortar.
Parameter
Model |
Host Motor |
Capacity(T/H) |
MINI-1000 |
7.5 |
1-3 |
MINI-2000 |
11 |
2-6 |
MINI-3000 |
15 |
3-9 |
MINI-5000 |
22 |
5-10 |
Inquiry
Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.