HZS180 Concrete Mixing Plant

Product Introduction

1. Theoretical productivity of HZS180 concrete mixing plant is 180m3/h, the mixer model is JS3000 forced concrete mixer, the batching machine is PLD4800, the number of compartments is 4 compartments, the batching capacity is 180m3, the discharging height is 4 meters, which can be transported to a higher height with screw conveyor pump.

2. HZS180 station contains two rows of cement silo and a series of screw conveyor, by a microcomputer control room side control of the whole concrete mixing plant operation. The mixing materials can be delivered to two concrete trucks at the same time.

3. It also adopts the latest design concepts of electronic weighing, microcomputer control, digital display and other control technologies, and the electronic weighing is equipped with buffer device and automatic compensation function, with high measuring accuracy.

4. The sand and stone feeding system adopts large width herringbone belt feeding, which can set up pedestrian security check walkway according to the demand, and there are large-capacity sand and stone storage silos on the roof of the building, so that the whole concrete production is in a totally closed environment from metering to mixing and discharging, which is an outstanding performance in terms of green environment protection.

Working Principle

1）Aggregate from the batching station aggregate silo unloading door unloaded into the aggregate metering hopper for measurement, measurement after unloading to the far turn of the flat belt, flat belt to the inclined belt conveyor, the inclined belt conveyor to the mixer on the top of the hopper waiting for instructions.

2）At the same time, cement, as well as fly ash and so on, such as by the spiral conveyor conveyed to their respective metering hopper for measurement, water, as well as admixture by the pump and additives were pumped to their respective metering hopper for measurement.

3）Measurement.

4）After the measurement of all kinds of materials, the control system sends out the instruction to start feeding into the mixer for mixing.

5）After mixing is completed, open the discharge door of the mixer, and unload the concrete into the mixing transportation through the discharge hopper, and then enter the next working cycle.

Parameter

Inquiry

Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.